Sensor panel 2

LD 739708
Sensor panel 2
Sensor panel 2

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.


For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

˟

Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.

˟

Description

Unit to study the function of various analog and digital sensors.

The device is equipped with original sensors for monitoring the differential pressure of a DPF, as well as for detecting the position of the accelerator pedal and for monitoring the gear neutral position and the brake pedal position. Additionally, the knocking sensor 73903 can be connected.

The SENT signals according SAE J2716 can be presented and evaluated directly with the Automotive diagnosis tester software 739589*.

The device has a high-speed CAN bus interface, to which the signals of integrated sensors are output.
Via the CAN Bus Adapter USB 739581USB or CAN bus multi-adapter 773961, the measured signals can be evaluated.

The device is designed with a full color print. For the supply voltage T 30, the ignition T 15, CAN High, CAN Low and the ground signal connections from left to right are for easy connection of other devices available .

*software version 1.18 and newer

Technical data

Supply voltage: V = 12 V=

Differential pressure sensor

  • Supply voltage: V = 5 V=
  • Pressure range: 0 - 125 kPa
  • Data interface: SENT acc. to SAE J2716
  • SENT channels: fast channel with pause
  • SENT signals: 2*12 Bit

Gas pedal position sensor

  • Supply voltage: V = 5 V=
  • Sensitivity: 3 mT
  • Data interface: SENT (3 µs) acc. to SAE J2716
  • SENT channels: fast channel without pause and slow channel
  • SENT signals: 1*12 Bit

Gear neutral position sensor

  • Data interface: PWM
  • Supply voltage: V = 5 V=
  • Low level: VL < 1 V
  • High level: VH > 4 V
  • Frequency: fd = 125 Hz
  • Pull up resistance: R = 1 kW

 Braking lights/pedal switch

  •  Data interface braking pedal: digital
  • Data interface braking lights: digital
  • High level: VH > 12 V

Knocking sensor amplifier

  • Input filter: fg = 1.6 kHz
  • High level: VH > 7 V
  • Pulse duration: tkn = 400 ms

 

Related Documents

PDF (Instruction Sheet) PDF (Instruction Sheet) [739 708] Sensor panel 2
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us