Mechanical force measurement

per page
  1. Dynamometer

    Scale on transparent sleeve to clarify the setup and with locking device against overexpansion of the spring. Suitable with a projector.

    • Measuring accuracy: ±3 % of the end value
    • Scale length: 7 cm
    • Length: 20 cm
    Kat.-Nr.Measuring rangeGraduation
    314 44   8 1 N50 mN
    314 45   8 2 N50 mN
    314 46   8 5 N0.25 N
    314 47   8 10 N0.5 N
  2. Dynamometer, tension and compression

    Scale on transparent sleeve and locking device against overexpansion of the spring. For compressive force measurements, the upper holding loop can be moved to the side. Without compressive force transducer.

    • Length: 16 cm
    Kat.-Nr.Measuring rangeGraduation
    314 01   8 1,5 N0,1 N
    314 02   8 3 N0,1 N
  3. Dynamometer

    Scale on transparent sleeve in g/kg and N to clarify the setup, with locks against overexpansion of the spring. With zero-point displacement.

    Kat.-Nr.Measuring rangeScaling
    200 343   8 250 g / 2.5 N5 g / 0.05 N
    200 344   8 500 g / 5 N10 g / 0.1 N
    200 345   8 1 kg / 10 N20 g / 0.2 N
    200 346   8 2 kg / 20 N40 g / 0.4 N
    200 3473 kg / 30 N100 g / 1 N
    200 348   8 3 kg / 50 N100 g / 1 N
  4. 34113   8 

    LD Spring balances for parallelogram of forces, set of 3

    Spring balances for parallelogram of forces, set of 3

    Details
  5. Precision dynamometer according to Prof. Maey

    With zero-point slide adjustment to compensate prior charges due to the experiment, e.g. with balance pans or rolls. Very legible scale, since graduation marks are combined in groups of 10 on alternating red and white fields. In plastic sleeve, with locking device against overexpansion of the spring.

    • Measuring accuracy: ±0,5 % of the end value
    • Scale length: 10 cm
    • Zero-point slide adjustment field: +2 cm
    • Length: 19 cm to 23 cm (depending on the model)
    Kat.-Nr.LengthMeasuring rangeGraduation
    314 081   8 190 mm10 mN0.1 mN
    314 111   8 190 mm100 mN1 mN
    314 141   8 190 mm1.0 N0.01 N
    314 151   8 200 mm2.0 N0.02 N
    314 161   8 210 mm5.0 N0.05 N
    314 171   8 210 mm10 N0.1 N
    314 181   8 220 mm20 N0.2 N
    669 040   8 230 mm50 N0.5 N, no zero-point slide adjustment
    314 201   8 230 mm100 N1 N, no zero-point slide adjustment
  6. Round dynamometer

    With ball bearing mounted pulley on magnet.

    • Diameter: 17 cm
    Kat.-Nr.Measuring rangeGraduation
    314 212   8 2 N0,1 N
    314 215   8 5 N0,1 N
per page
Print page

Contact Us

We are represented by agencies throughout the world.

Worldwide
For the address of your local distributor, please contact us per email:
sales@ld-didactic.de
Europe
For European distributors, please visit: European distributors
Technical Service-Hotline
Click here for our contact form and postal address.

Contact Us