Sensor-CASSY 2 WiFi

LD 524013W
Sensor-CASSY 2 WiFi
  8  Sensor-CASSY 2 WiFi

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.

For ordering the dangerous good or other information please contact our customer service center.
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form


Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.



Cascadable interface device for recording measurement data

  • For connection to the USB port of a computer, another CASSY module or the CASSY display (524 020USB
  • Sensor-CASSY (524 010), Sensor-CASSY 2 and Power-CASSY (524 011USB) can be mixed in cascades
  • 3-fold electrical isolation (4-mm inputs A and B, relay R)
  • Measurement possible simultaneously at 4-mm inputs and sensor box connector sites (4 channels)
  • Cascading of up to 8 CASSY modules possible (to expand the inputs and outputs)
  • Up to 8 analog inputs can be provided by adding Sensor-CASSY sensor boxes
  • Automatic sensor box detection (plug and play) by CASSY Lab 2 (524 220)
  • Microprocessor-controlled with CASSY operating system (easily updatable via software for function enhancements)
  • For use as a bench-top, console or demonstration unit (also in CPS/TPS panel frames)
  • Voltage supply 12 V AC/DC via cannon plug or adjacent CASSY module
  • Developer Information, LabVIEW and MATLAB driver available through our internet homepage

Technical data

  • 5 analog inputs
    2 analog voltage inputs A and B on 4-mm safety sockets (electrically isolated)
    Resolution: 12 bits
    Measuring ranges: ±0.1/±0.3/±1/±3/±10/±30/±100/±250 V
    Measurement error: ±1% plus 0.5% of range end value
    Input resistance: 1 MΩ
    Scanning rate: up to 1 MHz per input
    Amount of measured values: nearly unlimited (dependent on PC) up to 10,000 values/s, at higher measuring rate max. 200,000 values
    Pre-trigger: up to 50,000 values per input
    1 analog current input A on 4-mm safety sockets (alternatively to voltage input A)
    Measuring ranges: ±0.03/±0.1/±0.3/±1/±3 A
    Measurement error: voltage error plus 1%
    Input resistance: < 0.5 Ω
    Scanning rate: up to 1 MHz per input
    See voltage inputs for further data
    2 analog inputs at sensor box connector sites A and B
    (All CASSY sensor boxes and sensors can be connected)
    Measuring ranges: ±0.003/±0.01/±0.03/±0.1/±0.3/±1 V
    Input resistance: 10 kΩ
    Scanning rate: up to 500 kHz per input
    See voltage inputs for further data
    The technical data will change depending on a connected sensor box. In this case CASSY Lab 2 automatically detects the possible measurement quantities and ranges when a sensor box is attached.
  • 4 timer inputs with 32-bit counters at sensor box sites A and B (e.g. for GM box, timer box or Timer S)
    Counting frequency: max. 1 MHz
    Time resolution: 20 ns
  • 5 LED status indicators for analog inputs and USB-port
    Colours: red and green, according to status
    Light intensity: adjustable
  • 1 change-over relay (switching indication via LED)
    Range: max. 250 V/2 A
  • 1 analog output (LED switching state indicator, e.g. for holding magnet or supplying experiment)
    Variable voltage range: max. 16 V/200 mA (load ≥ 80Ω)
  • 12 digital inputs (TTL) on sensor box sites A and B (at present only used for automatic sensor box detection)
  • 6 digital outputs (TTL) on sensor box sites A and B (at present only used for automatic switching of a sensor box measuring range)
  • 1 USB port for connection to a computer
  • 1 CASSY bus for connecting additional CASSY modules
  • Dimensions (WxHxD): 115 mm x 295 mm x 45 mm
  • Weight: 1.0 kg

Scope of delivery

1 5240033  4  WiFi adapter for Sensor-CASSY LD
1 524013  8  Sensor-CASSY 2 LD
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email:

 Click here for our contact form and postal address.

Contact Us