Automotive lighting

VA2.1.2.1
Automotive lighting
Automotive lighting

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.


For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

˟

Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.

˟

Description

With polyellipsoid headlamps the emitted light beams have a farther focus. Positioning a lens near it results in an exact light/dark boundary. The remaining light can then be uniformly distributed a little farther ahead on the roadway through an appropriate lens. Already shortly after exiting the ellipsoid, the bundled light beams are considerably smaller than with a paraboloid or free-form reflector. Only beyond the final lens (with a small effective reflex surface) does it grow.

For various load conditions of the vehicle, the headlamp level control should prevent blinding of oncoming traffic. The reflectors can be tilted vertically and adjusted by electric motors. If manually adjusted, these are set by a locator operated by the driver. With automatic headlamp level control, the assembly's position is detected by level sensors, and the control unit sends the corresponding signals to the electric motors.

The conventional turn signal control does not need to dispense with the comfort functions of modern vehicles. For example, the highway flashing is a useful extension in the retrofit area. Press the turn signal lever once and the turn signal flashes three times, for example to change the lane. This function can be easily retrofitted didactically with a module in this system.

Comfortable and intelligent control of the interior lighting is now included in all cars. So the interior lights e.g. directly turns off when the vehicle is started - whereas they are turned off slowly dimmed after some time when the door is closed without engine start. In this equipment all components including a boot lighting are included on a practice-oriented level.

Components of equipment sets

1 738103 Ignition start switch LD
1 738032 Battery connection with protection circuit LD
1 7381511 Control lamps KI LD
1 738871 Starter substitute w. load simulation LD
1 738114  4  Light control LD
1 738295 Central electrics LD
1 73806 12 V on-board socket LD

Main lights
1 73811  8  Head lamp switch LD
1 738131  8  Stalk with with parking light LD
1 738190  8  Rear lights LD

Main lights halogen
1 7381661  8  Headlights right halogen + LED LD
1 7381671 Headlights left halogen + LED LD
1 738152 Rear lamp monitoring LD
1 739573  4  Automotive Set Point Potentiometer LD

Main lights Xenon
1 7381822 Set: Bi Xenon headlights LD
1 739195  8  Connecting Leads, set of 7 LD
Signal system
1 73835  8  Normal and High Volume Horn LD
1 738373  8  Turn signal control LD
1 738372  8  Convenience turn signal control unit LD
1 73838  8  Warning Lamp Switch LD
2 738361  8  Side turn signal light LED LD
1 7397601 * Driver assistance 1 LD
Courtesy lights
1 73807  8  * Interior lamp LD
1 738075  4  * Luggage lamp LD
1 73808  4  * Door contact switch LD
1 738311  8  * Courtesy lamp control LD
Supplementary light
1 738141  8  * Fog lamp switch LD
2 73818  8  * Auxiliary headlamp LD
Power distribution
1 73809  8  ** Fuse holder LD
2 738291  4  ** Relay 1NO LD
1 73828  4  ** Relieving Relay LD
1 73830  4  ** Relay 1 CO LD
1 738044 ** AGM-battery 12V LD
1 738043 ** Vehicle battery connecting kit LD
1 537321 ** Rheostat 9.5 Ohm LD
1 73812  4  ** Multi-purpose switch LD

Measuring equipment
1 LDS00001  4  ** Stopwatch, digital LD
1 72720  8  ** Automobile Meter Zero-Left LD
2 72721 ** Automobile Meter Zero-Center LD
2 738985 ** Automotive meter LD
Accessories
1 500990 Adapter sockets, set of 2 LD
1 73805  4  Connection leads I, set LD
1 738027  4  ** Digital power supply 1 - 16 V/40 A LD
1 688131 * Mains cable Type G LD
1 72626  8  Panel frame VT180, three-level LD
7 50059  8  Safety bridging plugs, black, set of 10 LD
1 500592  8  Safety bridging plugs with tap, black, set of 10 LD
1 7389831  8  Safety laboratory cable, set 102 LD
1 6890813  8  Set 12 automotive fuses LD
1 6890814  4  Set 2 automotive automatic fuses LD
1 775012DE  4  LIT-print: Automotive lighting, German LD
1 775012EN  4  LIT-print: Automotive lighting LD

Supplementary equipment
1 73801  8  * Cable and plug box LD
1 500593  8  * Fault simulation plugs, black, set of 10 LD
1 738021  4  * Battery charger, automatic LD
1 688161  8  * Travel adapter LD
1 73810  4  Ignition switch LD

Articles marked with ** are additionally required.

Articles marked with * are not essential, we do however recommend them to carry out the experiment.

Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us