Dual Conveyor Band with PLC

VE6.7.2.3
Dual Conveyor Band with PLC
Dual Conveyor Band with PLC

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.


For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

˟

Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.

˟

Description

E6.7.2.3
Dual Conveyor with PLC

Programmable Logic Controllers (PLCs) are used extensively in many manufacturing processes and control applications being readily programmed and reprogrammed when variations in the controlled process are required. This dual conveyor system allows greater study of PLCs in process control systems. More complex control scenarios can be developed using combinations of timers and counters with master and zone control functions. The self-contained unit comprises a power supply, interface board and a range of sensors and solenoid actuators and a height gauging unit. The interface circuits allow the conveyor system to be operated from any standard industrial PLC using 24 V dc logic levels.

System

Two combined conveying systems can be used to process complex tasks. Parts selection by means of logic detection and sensors, induction and photo electronic sensors. Sorting processes and assembly of individual parts. Compatible interface for industrial PLC types.

Objectives

  • Two complex conveying systems can be used to process complex tasks.
  • Parts selection by means of logic detection and sensors.
  • Test and optimize programming on a hardware

Funktion

  •  Fully working model of a real-life application
  • Part selection by sensors
  • Induction sensors
  • Opto-electronic sensors
  • Component sort process
  • Assembly process
  • Interfaces to most major PLCs
  • Pre-wired or "wire your own" Mitsubishi, Allen Bradley & Siemens PLCs available (purchased separately), or use your own
  • Comprehensive theory & experiment manual

Topics

  • Logic fundamentals
  • Basics of PLC programming
  • Developing ladder logic programs
  • Programming timers
  • Programming counters
  • Structure of control systems
  • Sequencer programmes
  • Jump instructions & sub-routines
  • Combined counter & timer functions
  • PLC installation practices

Components of equipment sets

1 34-120-1 Dual Conveyor - PLC Application FB
1 34-060 Siemens PLC FB
1 34-060-1 Siemens PLC I/O Pre-wired Pack FB
1 34-020 Mitsubishi PLC FB
1 34-020-1 Mitsubishi PLC I/O Pre-wired Pack FB
1 34-040 Allen Bradley PLC FB
1 34-040-1  8  Allen Bradley PLC I/O Pre-wired Pack FB
1 34-110 Diameter Gauging Unit FB
1 additionally required: 1 PC with Windows 7 / 8.1 / 10 (x86 or x64)
Experiments require the Siemens software TIA Portal to create programs.
The equipment can require additional software modules.
1 773091 Simatic Step 7 Prof. Training 1x EW
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us