Squirrel cage rotor D, 1.0

VE2.3.4.4
Squirrel cage rotor D, 1.0
Squirrel cage rotor D, 1.0

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.


For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

˟

Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.

˟

Description

The experiments are carried out with industrially manufactured machines class 1 kW. The 1 kW machines have a higher efficiency due to the lower winding resistance and come closer to an ideal machine. All test machines have a special base for connection to the Machine Test System 0.3. With the Machine Test CASSY all measured values of the AC machines are recorded. The measured values can be shown directly on the built-in display as a single value, table of a measurement series or diagram. The measurements can be made without additional software, and the measured data can be stored locally on the unit. The Machine Test CASSY is used to record the characteristic curves of the test machines. The power supply for the test machines is partly taken directly from the public supply network.

Objectives

  • Protective measures and electrical safety
  • Construction and commissioning of electrical machines
  • Use of starting circuits
  • Efficiency of the machine
  • Assessment of characteristic curves of electrical machines

Squirrel cage rotor D is a special design for asynchronous machines (Dahlander motors). In Dahlander circuits, the three-phase windings of the stator are equipped with a central tap. This allows the number of pole pairs and therefore the speed of the rotor to be switched in the ratio of 1:2

Highlights:

  • To protect against overheating, the stator windings of the test machines are equipped with temperature detectors.
  • In case of overheating, the machine testing system switches off the load of the test machine, thus maintaining the air cooling. This prevents damage to the testing machines.
  • The test machines have a didactic terminal board with the winding diagram printed on it.
  • The ends of all the windings are led out at the terminal board at safety sockets (4 mm).
  • Computer-aided measured value acquisition provides meaningful measurement results.
  • The arrangement of the 4 mm safety sockets corresponds to the standards for industrial machines.

All functions of the Machine Test CASSY 1.0 can be operated quickly and directly via the display, the rotary wheel and the buttons on the unit. All settings and measurement results can be saved on the unit and quickly called up again later or simply downloaded.

In addition, the Machine Test CASSY 1.0 is fully controllable in real time via RJ45 Ethernet, W-LAN and USB-C interfaces.

These interfaces can be used by the following software:

  • CASSY Lab 2 for drives and energy systems,
  • MATLAB® and LabVIEW ™
  • Lab Docs Editor Advanced

Several integrated servers are available in Machine Test CASSY 1.0 for the local media connection of at least four end devices simultaneously.

For more details, see product data 7732900 or 7731901 Machine Test CASSY 1.0

The individual equipment is equally suitable for student experiments in the laboratory with low voltage (230 / 400 V three-phase current) and - with a mobile trainer - for teacher demonstration in the classroom. The experiments are carried out according to the manual.

The target group is made up of commercial apprentices and students of electrical machine construction. The course offers experiments at an intermediate level and also allows for the necessary insight into machine behaviour for scientific interpretation at undergraduate level. The media connection makes the experiments suitable for demonstration in the classroom or a lecture hall.

In the following configurations there are further extended experiments with asynchronous machines:

  • E2.3.4.1 Squirrel cage rotor, 400/690
  • E2.3.4.2 Squirrel cage rotor, 230/400
  • E2.3.4.3 Slip-ring rotor
  • E2.3.4.5 Multi-function machine

Topics

  • Design and mode of operation
  • Characteristic curves for motor operation, high speed
  • Characteristic curves for motor operation, low speed
  • Dahlander circuit
  • Braking
  • Efficiency
  • Open-circuit test
  • Short-circuit test

Components of equipment sets

1 773294 Squirrel cage motor D, 1.0 LD
1 73283 Motor protection switch, 1.6-2.4 A LD
1 73284  8  Motor protection switch, 2.4-4 A LD
Set-up for the machine test
1 745563 Power circuit breaker LD
Machine test system 1 kW
1 7732901 Machine Test CASSY 1.0 LD
1 524222 CASSY Lab 2 for Drives and Power Systems LD
1 7732990 Electrical dynamometer, 1.0 LD
1 773258  4  Coupling / shaft end guard, 1.0, transparent LD
1 31540  8  Weight, 2 kg LD
1 773115 Machine base bench, 120 cm LD
1 73256  4  Coupling, 1.0 LD
Extension for additional experiment
1 73155  8  Pole reverser, Dahlander LD
Manuals:
1 775235DE  4  LIT-print: Asynchronous machines 1.0, German LD
1 775235EN  4  LIT-print: Induction Machines 1.0 LD
Power supply:
1 72675  8  Three-phase terminal unit with RCD LD
1 72609  4  Panel frame T130, two-level LD
1 50059  8  Safety bridging plugs, black, set of 10 LD
1 500591  4  Safety bridging plugs, yellow/green, set of 10 LD
1 500855  4  Safety experiment cables, 32 A, set of 34 LD
1 500856  4  Safety experiment cables, 32 A, yellow/green, set of 5 LD
Additionally required:
PC with Windows 7/8/10

As an option for existing motors:

The following base  are options to use existing motors on site.
It's possible to use machines  with  B3 design and a 71 mm shaft  level.

1 773256  4  Assembly set el. machine base 1.0 short LD
1 773257  4  Assembly set el. machine base 1,0 long LD
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us