Phase control fault simulator

VE2.4.2.2
Phase control fault simulator Fault Simulator Phase Control (E2.4.2.2)
Phase control fault simulator
Phase control fault simulator
Phase control fault simulator

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.


For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

˟

Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.

˟

Description

The experiments are carried out on training panels in panel frames.

Objectives

  • Protective measures and electrical safety
  • Finding and analysing faults in phase angle control circuits
  • Use of commercial measuring instruments: hand-held multimeters and oscilloscopes

The fault simulator is a standard dimmer for a resistive load (Pmax. = 1.2 kW) pre-calibrated for minimum value. Various measuring points allow for systematic troubleshooting. There are a total of 20 faults which can be switched and which are of the following categories:

  • Breaks
  • Short-circuits
  • Wrong components
  • Component faults

The faults are activated by slider switches located behind a lockable cover.

Highlights:

  • Fault simulator phase angle is listed as a training board system.
  • Minimised wiring effort, as the circuits only need to be supplemented by the measuring connections and some bridge connectors.

All functions of the Power Analyser CASSY can be operated quickly and directly via the display, the rotary wheel and the buttons on the unit. All settings and measurement results can be saved on the unit and quickly called up again later or simply downloaded.

In addition, the Power Analyser CASSY is fully controllable in real time via RJ45 Ethernet, W-LAN and USB-C interfaces.

These interfaces can be used by the following software:

  • CASSY Lab 2 for drives and energy systems,
  • MATLAB® and LabVIEW ™
  • Lab Docs Editor Advanced

The following integrated servers are available in the Power Analyser CASSY for the local media connection of at least four end devices simultaneously.

For more details, see product data 727110 or 727111 Power Analyser CASSY.

The equipment is equally suitable for pupil and student experiments in the laboratory with low voltage (DC, AC and three-phase current) and - with a mobile trainer - for teacher demonstrations in the classroom or lecture hall. The experiments are carried out according to the manual.

The target group is made up of commercial apprentices and students of electrical machine construction. The course offers experiments at an intermediate level and also allows for the necessary insight into machine behaviour for scientific interpretation at undergraduate level. The media connection makes the experiments suitable for demonstration in the classroom or a lecture hall.

Topics

  • Investigation of a circuit with some 20 different faults
  • Component faults (short-circuits, high resistance)
  • Breaks in conductors
  • High or low-resistance connections within the circuit
  • Wrong or missing components (e.g. incorrect values)

Components of equipment sets

1 735390 Fault simulator for phase control LD
1 735190  8  Phase control noise filter 3 x 4.5 A LD
2 505272  8  Bulbs, 230 V/40 W, E14, set of 2 LD
1 72909  8  Lamp sockets E14, set of three LD
Manuals:
1 569071  4  LIT-print: Fault simulator phase angle control, German LD
1 569072  4  LIT-print: Fault Simulator Phase Control LD
1 727111 Power Analyser CASSY Plus LD
1 524222 CASSY Lab 2 for Drives and Power Systems LD
Power supply:
1 72680  4  Transformer, 45/90, 3N LD
1 72609  4  Panel frame T130, two-level LD
1 50059  8  Safety bridging plugs, black, set of 10 LD
1 500855  4  Safety experiment cables, 32 A, set of 34 LD
1 500856  4  Safety experiment cables, 32 A, yellow/green, set of 5 LD
Additionally required:
PC with Windows 7/8/10
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us