Basic Package S7-1512C-1 PN +DP

VE6.6.3.2
Basic Package S7-1512C-1 PN +DP
Basic Package S7-1512C-1 PN +DP

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.


For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

˟

Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.

˟

Description

This course familiarises students with the most important functions of a programmable logic controller (PLC). The basic package for the Siemens PLC S7-1512C-1 PN+DP contains only the assembly components and accessories. The PLC S7-1512C-1 PN+DP is not included in this kit.

Attention:

This kit is designed for customers that already have a PLC S7-1512C-1 PN+DP or for customers that want to buy the PLC S7-1512C-1 PN+DP somewhere else.
The S7-1512C-1 PN+DP is not included in this kit.
If you want to buy a complete system consisting of Basic Package and PLC, then take a look a the following kit:
E6.6.3.21: Trainer Package S7-1512C-1 PN+DP

Educational objectives

  • Operating the PLC 
  • Creating programs
  • Learn logistics and control functions
  • Testing the programs
  • Setting up the network connections for Profi-Net and Profi-Bus / DP

The teaching packet consists of:

  • Base plate PLC

Description of the base plate PLC:

  • 24 digital inputs, 16 of these with touch incremental switch and 16 digital outputs are directly accessible via the safety connector (4 mm).
  • 32 digital inputs and 32 digital outputs are accessible via 27-pole plugs configured for MCS.
  • 2 analogue input channels and 2 analogue output channels are accessible via safety connectors (4 mm).
  • A maximum of 8 analogue input channels and 4 analogue output channels are accessible on two 30-pole plugs, depending on the PLC.
  • Profi-Net is directly connected to the CPU.
  • The power supply is connected with the switch via a protected plug.
  • The power supply is designed for an output of 190 W at 120 V, 60 Hz and 230V, 50 Hz. The mains voltage is automatically recognised and switched.
  • The control voltage amounts to 24 v DC at max 8 A.

Method

  • Student experiments based on the assignments in the experiment description.

Students completing vocational training in electrical engineering for a trade or industry are the target group addressed. The course is geared toward advanced learners. So prior knowledge is recommended:

  • Basics of contactor controls
  • Programming of PLC 
  • Instruction in the dangers of electrical technology

The following sets are recommended for further learning:

  • E6.5.2.1 a Contactor controls with modules, 24 V
  • E6.5.2.2 a Contactor control with experimental plates, 24 V
  • E6.5.2.5 Controlling with limit and proximity switches
  • E6.7.1.1 ASIMA for small controllers.
  • E6.7.2.1 MCS system 4 station control over PLC 
  • E6.7.2.2 MCS system 6 stations control over PLC with Profi-Bus DP

Topics

  • Programming of a PLC 
  • Programming method KOP, FUP, AWL, S7-GRAPH
  • Expanded program structure
  • Logic connections
  • Timer and clock timer functions
  • RS components
  • Counting and frequency measurement
  • Analogue value processing, set value and control

Components of equipment sets

1 773070 Basic Panel Siemens EW
1 773073  8  Assembly set PLC S7-1512 LD
1 773080 * HMI Touch Panel for PLC TP 1500 Comfort EW
1 773091  4  * Simatic Step 7 Prof. Training 1x EW
1 72610  8  * Panel frame T150, two-level LD
2 500641  4  * Safety connecting lead, 100 cm, red LD
2 500642  4  * Safety connecting lead, 100 cm, blue LD
1 50059 * Safety bridging plugs, black, set of 10 LD
1 6893000  4  * RJ45 crossover Cable 2m LD
PC with operating system Windows 7/8/10
1 773050 * ASIMA Plant Simulator II EW
1 70000CBT * DVD: COM3LAB Software LD
1 A selection of 33 masks can be found in E6.7.1.3.
1 8-2412123-000-10-0  4  50-pole ribbon cable, 700 mm EW
1 77304901  4  Mask M1 Logic basic functions LD
1 77304902  4  Mask M2 Digital function modules LD
1 77304903  4  Mask M3 Motor ON/OFF LD
1 77304904  4  Mask M4 Reversing contactor LD
1 77304905  4  Mask M5 Star-delta connection LD
1 77304906  4  Mask M6 Reversing star-delta connection LD
1 77304907  4  Mask M7 Pendulum table control LD
1 77304908  4  Mask M8 Dahlaner circuit LD
1 77304909  4  Mask M9 Motor with 2 windings LD
1 77304910  8  Mask M10 Motor self-starter LD
1 77304911  4  Mask M11 Conveyor belt system LD
1 77304912  4  Mask M12 Reactive-current compensation LD
1 77304913  4  Mask M13 Heating control LD
1 77304914  4  Mask M14 Running light LD
1 77304915  4  Mask M15 Automatic filling System LD
1 77304916  4  Mask M16 Tank system LD
1 77304917  4  Mask M17 Coal grinder LD
1 77304918  4  Mask M18 Embossing machine LD
1 77304919  4  Mask M19 Fan control LD
1 77304920  4  Mask M20 Traffic light for road works LD
1 77304921  4  Mask M21 traffic lights LD
1 77304922  4  Mask M22 Collecting belt conveyor LD
1 77304923  4  Mask M23 Conveyor charging system LD
1 77304940  4  Mask M40 Silo control LD
1 77304941  4  Mask M41 Reactor LD
1 77304942  4  Mask M42 Goods lift LD
1 77304943  4  Mask M43 Pump control LD
1 77304944  4  Mask M44 Dirty-water pump system LD
1 77304945  4  Mask M45 Monitoring of 3 pumps LD
1 77304946  4  Mask M46 Pump system (pressure) LD
1 77304947  4  Mask M47 Drinks machine LD
1 77304948  4  Mask M48 Mixer LD
1 77304949  4  Mask M49 Sequence control LD
3 8-2600001-000-10-0  8  Transparent folder, 410 mm x 320 mm x 10 mm EW
1 775790DE  4  LIT: E6.7.1.1-3 ASIMA DE LD
1 775790EN  4  LIT: E6.7.1.1-3 ASIMA EN LD
1 additionally required: 1 PC with Windows 7 / 8.1 / 10 (x86 or x64)
Experiments require the Siemens software TIA Portal to create programs.
The equipment can require additional software modules.

Articles marked with * are not essential, we do however recommend them to carry out the experiment.

Print page

Contact Us

We are represented by agencies throughout the world.

Worldwide
For the address of your local distributor, please contact us per email:
sales@ld-didactic.de
Europe
For European distributors, please visit: European distributors
Technical Service-Hotline
Click here for our contact form and postal address.

Contact Us