Calorimetric chamber

LD 38929
Calorimetric chamber
  4  Calorimetric chamber

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.

For ordering the dangerous good or other information please contact our customer service center.
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form


Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.



A "model house" for quantitative and qualitative investigations of the relationship between heat energy consumption and heat insulation. The sides of the house are made of thermal insulation material with a square opening into which various plates can be fitted to serve as test walls. The interior is heated by an incandescent lamp which, if necessary, can be mounted in the calorimetric chamber and supplied with power via leads passing through the walls of the model. Various channels allow temperature measurements inside the chamber and at the inner and outer surfaces of the walls of the model.

Technical data

  • Chamber dimensions (outside):
    28 cm x 28 cm x 20 cm
  • Weight of heat accumulator: approx. 500 g
  • Chamber heater:
    Supply: 24 V via 4-mm sockets
    Current: 0.4 A
  • Diameter of stopper holes: 1 x 1.5 mm, 1 x 6 mm, 1 without borehole
  • Area of test walls: 15 cm x 15 cm each
  • Thickness of test walls:
    Ceramic: 11 mm
    Polystyrene: 10 mm
    Aluminium: 3 mm
  • Continuous temperature rating of the calorimetric chamber and building materials: 60 °C
  • Total weight: 2.6 kg

Scope of delivery

1 Calorimetric chamber
1 Heat accumulator made of aluminium
1 Incandescent lamp, 24 V, 10 W, to act as heat source
1 Tubular socket
3 Rubber stoppers
1 Ceramic plate
1 Polystyrene plate
1 Aluminium plate
2 Transparent acrylic plate
1 Hook for lifting the plates

Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email:

 Click here for our contact form and postal address.

Contact Us