LD 773961


PC adapter for analyzing CAN bus messages. Both low-speed and high-speed buses can be connected. The new CAN-FD is also supported.

This set consists of:

Hardware CAN adapter
CAN bus USB adapter (opto-isolated) for connection to the USB port of the computer.
The supplied MC adapter cable (9-pin DSub plug and 4 mm safety plugs) is used for connection to a LEYBOLD CAN bus system.
The supplied OBD adapter cable (9-pin DSub plug according to CiA® 102 and 16-pin OBD-2 plug) is used to be connected to an OBD-2 socket of a functional engine or of the (didactic)vehicle.

Software (German and English)
The program is a CAN bus viewer for Windows. It enables CAN messages to be sent and received. Existing networks can be checked or set up quickly.

The measurement of the bus load including error frames and overload frames is just as possible as the induced generation of errors for incoming and outgoing CAN messages.

Device driver for MS Windows® 10, 8 and 7, an internet connection is temporarily required for installation.

Technical data

  • Data rate up to 1 Mbit / s (standard CAN)
  • Data rate up to 12 Mbit / s (CAN-FD)
  • Data field length CAN-FD: max. 64 bytes
  • Meets CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
  • Meets the CAN-FD specifications  ISO 11898-1 and NON-ISO (BOSCH) 
  • Power supply via USB bus
  • Individual address assignment when using several adapters at the same time
  • Galvanic isolation up to 500 V
  • Connections 4 mm safety cable: yellow/green = CAN High, blue = CAN Low
  • Connections OBD-2 connector: Pin 6 = CAN High, Pin 14 = CAN Low

Scope of delivery

  • CAN bus adapter USB, galvanically isolated
  • Connection cable DSub9 to three 4 mm safety plugs, length 100 cm
  • Connection cable DSub9 to 16-pin OBD-2 socket, length 100 cm
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email:

 Click here for our contact form and postal address.

Contact Us