High-performance gas chromatograh with capillary column and FID

LD 665601
High-performance gas chromatograh with capillary column and FID
High-performance gas chromatograh with capillary column and FID

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.


For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

˟

Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.

˟

Description

Main features:

  • Flame ionization detector (FID), with high sensitivity, low dead volume and high stability
  • Integrated operating system and software
  • Graphical user interface with mouse control for parameter input and conducting measurement and evaluations:
    - determination of retention times and peak areas
    - comparison of two chromatograms
    - referencing, i.e. comparison of reference peaks and measurement peaks for determining absolute quantities
    - report generator
  • Automatic baseline calibration before every measurement
  • Excellent separation performance with capillary columns, 25 m long, inside diameter 0.32 mm, granular size 0.6 µm, OV-1
  • Carrier gas supply via steel gas bottles

Technical data

Gas chromatograph:

  • Oven chamber: with motor-driven air circulation
  • Heating power: max. 400 W
  • Temperature sensor: Pt 500
  • Temperature control: closed-loop PID control, programmable via integrated computer, complete temperature program with heating speeds between 1 and 10 K/min
  • Accuracy: 1 K
  • FID gas supply: hydrogen
  • Separately heated injector and detector block
  • Carrier gas: H2, He or N2

Detector:

  • FID, with thermostat, electrically isolated microprocessor-controlled evaluation electronics, 12 bit resolution, built-in supply with purified combustion air, cleaned by replacement of activated-charcoal filter

Computer:

  • CPU: 16 bit, 20 MHz clock speed
  • RAM: 1 MB, EEPROM 512 KB
  • Video adapter: VGA-compatible, resolution 640 x 480 pixels
  • Mouse, keyboard and USB 
    Mains voltage: 220...240 V/50...60 Hz
  • Dimensions: 33 cm x 42 cm x 34 cm
  • Weight: 19 kg

Scope of delivery

1 Gas chromatograph with flame ionization detector and integrated computer
1 Capillary separating column
1 Soap-bubble flow meter (for adjusting the gas flow)
1 Mouse
2 Gas connectoin sets, wtih Teflon tubing and crimp connectors
1 T-connector (for connecting a single gas bottle when using hydrogen as the carrier gas and FID supply gas)
1 Power lead for gas chromatograph
1 User's manual
1 USB Stick
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us