Networking automotive systems: CAN FD Databus Gateway

VA2.6.1.9
Networking automotive systems: CAN FD Databus Gateway
Networking automotive systems: CAN FD Databus Gateway

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.


For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

˟

Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.

˟

Description

"Evolution instead of revolution" – that is the motto of the new CAN-Bus FD! It wasn’t the integration of a completely new data bus system that was at the forefront when CAN-FD was introduced, but rather the expansion and improvement of the existing one. The result was CAN-FD: taking all known mechanisms of the CAN bus, the data transmission speed and data volume in a message were increased considerably. “FD” means “flexible data rate”, which means that as a message is being transmitted, the speed of data transmission in the data field can be increased to up to 8 MBps! But that’s not all: now 64 bytes instead of the previous 8 bytes can be transmitted in a message. As a result, these two characteristics mean that with CAN bus FD, a longer message will be transmitted faster than a considerably shorter message is sent with the standard motor CAN bus.

This is especially beneficial for the flash duration for controllers. Vehicle software updates can now be carried out considerably faster than before.

LEYBOLD offers a CAN FD device set with which CAN FD messages can be freely defined and transmitted. These can be recorded on the logic level on the PC and on the physical level with an oscilloscope. Of course standard CAN messages can also be produced and transmitted for comparison.

Components of equipment sets

2 773961 CAN-Databus-Multi-Adapter LD
1 758213 CAN FD Interface, STE 6/100/200 LD
1 57730  4  Resistor, 62 Ω, STE 2/19 LD
2 577321  8  Resistor, 120 Ω, STE 2/19 LD

Measuring equipment
1 739007 Data bus Analyzer USB LD
1 739837 Set 2 4 mm oscilloscope probe adaptors LD
Accessories
2 726501  4  Safety socket plug-in board, 297 mm x 200 mm LD
1 50148  4  Bridging plugs STE 2/19, set of 10 LD
1 72688  4  AC/DC stabilizer LD
1 500641  8  Safety experiment cable, 100 cm, red LD
1 500642  4  Safety experiment cable, 100 cm, blue LD
1 500620  4  Safety connecting lead 50 cm, yellow/green LD
1 500621  4  Safety experiment cable, 50 cm, red LD
2 500622  4  Safety experiment cable, 50 cm, blue LD
1 500624  4  Safety experiment cable, 50 cm, black LD
1 775069DE  4  LIT-print: CAN FD and SENT, German LD

Supplementary equipment
1 758213 * CAN FD Interface, STE 6/100/200 LD
2 726501  4  * Safety socket plug-in board, 297 mm x 200 mm LD
2 577321  8  * Resistor, 120 Ω, STE 2/19 LD
Storage
1 647001  8  * Tray, low LD
1 647003  8  * Lid for tray LD
1 PC with operating system Windows  7/8/10/11

Articles marked with * are not essential, we do however recommend them to carry out the experiment.

Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us