Industrial DC-machine with rotors kits

VE2.1.5.1
Industrial DC-machine with rotors kits
Industrial DC-machine with rotors kits
Industrial DC-machine with rotors kits
Industrial DC-machine with rotors kits

This product is classified as a dangerous good and is not available for online purchase.

For ordering the dangerous good or other information please contact our customer service center.
This experiment/set up contains dangerous goods.
These are not available for online purchase.
You may order the experiment/set up without the dangerous goods.


For ordering the dangerous good or other information please contact our customer service center.
Email: webshopuk@ld-didactic.de
Telephone:+49 (0) 22 33 / 604 – 319
Go to contact form

˟

Request an offer

Thank you for your inquiry. We will get back to you as soon as possible.

˟

Description

The experiments are carried out with the industrial machine assembly kits.

Objectives

  • Protective measures and electrical safety
  • Recording machine characteristics
  • Set-up of various electrical machines

The DC machines with a changeable rotor consist of a rotor and two different stators. Only by assembling the stator and rotor does a ready-to-operate electrical machine of the 300 W class come into being. The stator contains a shunt winding or a series winding, the drive-end shield and the terminal box. The stator housing is mounted on a base and can be connected directly to the machine test system 0.3 (7732000). The stator and rotor are securely connected by star grip tension bolts, which allow the rotor to be changed quickly. No tools are required for this. The rotors are equipped with non-drive-end shield, fan impeller, cover bonnet and commutator, brushes, etc. Together with the machine test system, the characteristic curves of the machines can be traced back to the properties of the respective stator. Depending on the stator used, the model machine then shows the typical characteristics of shunt-wound and series-wound machines.

Highlights

  • Comparison of efficiencies and characteristics of machines with different stators
  • Simple assembly for rapid set-up and time-effective lab experiments

All functions of the Machine Test CASSY 0.3 can be operated quickly and directly via the display, the rotary wheel and the buttons on the unit. All settings and measurement results can be saved on the unit and quickly called up again later or simply downloaded.

In addition, the Machine Test CASSY 0.3 is fully controllable in real time via RJ45 Ethernet, W-LAN and USB-C interfaces.

These interfaces can be used by the following software:

  • CASSY Lab 2 for drives and energy systems,
  • MATLAB® and LabVIEW ™
  • Lab Docs Editor Advanced

The following integrated servers are available in the Machine Test CASSY 0.3 for the local media connection of at least four end devices simultaneously.

For more details, see product data 7731900 or 7731901 Machine Test CASSY 0.3

The equipment is equally suitable for student experiments in the laboratory with mains voltage (220 V direct current) and - with a mobile trainer - for teacher demonstrations in the classroom or lecture hall. The experiments are carried out according to the manual.

The target group is made up of commercial apprentices and students of electrical machine construction. The course offers experiments at an intermediate level and also allows for the necessary insight into machine behaviour for scientific interpretation at undergraduate level. The media connection makes the experiments suitable for demonstration in the classroom or a lecture hall.

In the following configurations there are further extended experiments with DC machines:

  • E2.5.2.1 Four-quadrant operation of a DC machine with controlled rectifiers
  • E2.5.2.2 Four-quadrant operation of a DC machine with an IGBT-H bridge circuit
  • E2.6.2.1 DC servo with industrial DC machine

Topics

  • Recording the torque-speed characteristic
  • Determination of the nominal operating values of electrical machines as a motor or as a generator
  • Comparison of the efficiencies of different machines as motor or as generator
  • Load characteristic in generator operation
  • No-load characteristic in generator operation

Components of equipment sets

1 7747726 DC stator NS, 0.3 LD
1 7747728 DC rotor, 0.3 LD
Machine test system 300 W
1 7731901 Machine Test CASSY 0.3 LD
1 524222 CASSY Lab 2 for Drives and Power Systems LD
1 7731991 Electrical dynamometer, 0.3 LD
1 773108  8  Coupling / shaft end guard 0.3, transparent LD
1 773110 Machine base bench, 90 cm LD

Alternative machine base unit:

A longer machine base unit is required if drives with commutation are used.
1 773115 Machine base bench, 120 cm LD
1 31539  4  Weight, 1 kg LD
1 73106  4  Coupling, 0.3 LD
Manuals:
1 775190DE  4  LIT-print: DC machines 0.3, German LD
1 775190EN  4  LIT-print: DC machines 0.3 LD
Required for generator experiments:
1 773360 Controllable resistive load, 0.3 LD
Power supply:
1 725852DG  4  DC machine supply, 0.3 LD
1 72609  4  Panel frame T130, two-level LD
1 500855  4  Safety experiment cables, 32 A, set of 34 LD
1 500856  4  Safety experiment cables, 32 A, yellow/green, set of 5 LD
Additionally required:
PC with Windows 7/8/10

As an option for existing motors:

The following base  are options to use existing motors on site.
It's possible to use machines  with  B3 design and a 71 mm shaft  level.

1 7747730 Assembly set exchangeable rotor base, 0.3 LD
Print page

Contact Us

Technical Service & Support:

Online Service Portal
Do you have any questions or suggestions regarding our devices, products, experiments, equipment sets or about our software? You need spare parts? FORM

Repair Service
You would like to register a repair? FORM

Europe
For European distributors, please visit: European distributors
Worldwide requests
Please contact us per email: sales@ld-didactic.de

 Click here for our contact form and postal address.

Contact Us